USB-C200PC TECHNICAL DATASHEET

Technical Specifications

Model

USB-C200PC

Product class

PC-based duplicator (Standard Series)

Target capacity

20 USB-C devices per session

Supported media

USB-C 3.0 and USB-C 2.0 flash drives

Connectivity

USB 2.0

Host USB ports required

Two high-speed USB ports (USB 2.0 or USB 3.0)

Supported operating systems

Windows 11 and later (supported environment)

Legacy OS compatibility

Software may run on older Windows versions; however, Nexcopy does not provide support for operating systems outside the supported environment.

System architecture

32-bit application architecture

Minimum system requirements

1.8 GHz dual-core processor or better; 1 GB–2 GB RAM

Software framework

Microsoft .NET Framework (automatically installed if not present)

Dimensions

200 mm × 200 mm × 130 mm

Weight

6.2 lb / 2.5 kg

Software updates

Lifetime updates included

Media & Compatibility

The USB-C200PC operates using standard mass-storage protocols rather than controller-level configuration. As a result, it is compatible with virtually all USB-C flash drives that enumerate as standard USB storage devices, allowing organizations to use existing USB inventory without controller restrictions.

Supported media

Compatible with USB-C 2.0 and USB-C 3.0 flash drives that enumerate as standard mass-storage devices

Controller restrictions

None for standard duplication workflows

Media sourcing

Customers may use their own USB-C flash drives from any manufacturer

Advanced media features

Controller-level features such as hardware write protection, partition control, and descriptor programming require PRO Series configuration and supported media

Upgrade path

USB-C200PC systems can be software upgraded to USB-C200PRO to enable advanced controller-level features when required

Copy Methods & Data Workflows

File copy

Standard file-level duplication from host system to connected USB-C targets

Full device copy

Bit-for-bit device-level duplication, including file system structures and boot sectors

Short device copy

Optimized device copy that writes only allocated sectors to improve performance on partially used media

IMG file creation

Generate device image files that capture boot code, partition structures, file systems, and data

IMG file copy

Write USB-specific image files (.IMG) to target devices for bootable or structured workflows

File copy add

Append new files to existing content on target devices without overwriting prior data

Unique Data Streaming

Supports unique data streaming per target device during a single production job

Extract files from USB-C media

Read and copy files from connected USB-C devices to host system storage for review or recovery

Indicators & Controls

System indicators

LED indicators on the hardware sockets, with real-time status feedback provided through the Drive Manager GUI

Physical controls

System operation is managed through the Drive Manager software, with physical interaction limited to inserting and removing USB-C media

Power & Electrical

UPS recommended

Helps prevent job interruption during power loss (not required)

Power quality

Operate on stable AC power; avoid frequent brownouts or unstable generators

Power input

120V / 240V auto-detecting power supply

Environment

Indoor use only

Avoid outdoor, vehicle, or uncontrolled warehouse environments

Operating altitude

Up to 6,500 ft (2,000 m)

Operating temperature

41°F–122°F (5°C–50°C)

Operating humidity

15% to 85% (non-condensing)

Storage temperature

14°F to 140°F (-10°C to 60°C)

Storage humidity

10% to 90% (non-condensing)

Ventilation required

Do not obstruct airflow around the unit during operation

Cleanliness & Maintenance

Dust-free environment recommended

Excessive dust may reduce socket reliability over time

Socket maintenance

USB target sockets should be inspected and cleaned periodically based on usage using electrical contact cleaner and compressed air

Packaging & Logistics

Unit packaging dimensions

14 in × 11 in × 9 in (356 mm × 280 mm × 229 mm)

Unit packaged weight

7.2 lb / 3.3 kg

DIM weight

12 lb / 5.5 kg

HS Code

8471.80 (Automatic data processing units and peripherals)

Country of origin

United States

Incoterms

Ex Works (Lake Forest, CA, USA)

Package materials

Corrugated cardboard carton with internal protective inserts

Palletization

Optional; available upon request. Not required for standard orders.

Stacking limitations

No special stacking limitations under normal handling conditions

Warranty & Support

Warranty

One-year warranty. Sockets are considered consumable after 30 days

Software updates

Lifetime updates included

Technical support

Lifetime technical support via email or phone. See the warranty page for equipment warranty details