(front/top view)
The SD200PC Technical Datasheet provides detailed engineering specifications, system behavior, and operational characteristics for the Nexcopy SD200PC duplicator. This page is intended for technical evaluators, IT professionals, and organizations that require deeper visibility into how the system functions beyond what is covered on the product overview page.
This page documents engineering-level characteristics. For pricing, availability, and overview details, see the SD200PC product page.
System Overview
The SD200PC is a PC-based duplication system designed to manage controlled, repeatable SD card production workflows. The system operates as a host-managed duplication platform, using a Windows-based application to manage connected target devices, enforce copy operations, and apply device-level behaviors such as write protection and writing of CID values to supported media.
Technical Specifications
- Model
- SD200PC
- Product class
- PC-based duplicator (Standard Series)
- Target capacity
- 20 SD cards per session
- Supported media
- SD, SDHC, and SDXC cards
- Connectivity
- USB 2.0
- Host USB ports required
- Two high-speed USB ports (USB 2.0)
- Supported operating systems
- Windows 11 and later (supported environment)
- Legacy OS compatibility
- Software may run on older Windows versions, but Nexcopy does not provide support for unsupported operating systems
- System architecture
- 32-bit application architecture
- Minimum system requirements
- 1.8 GHz dual-core processor or better; 1 GB–2 GB RAM
- Software framework
- Microsoft .NET Framework (automatically installed if not present)
- Dimensions
- 200 mm × 200 mm × 130 mm
- Weight
- 6.2 lb / 2.5 kg
- Software updates
- Lifetime updates included
Media & Compatibility
The SD200PC operates using mass-storage protocols rather than controller-level configuration. As a result, it is compatible with virtually all SD cards that enumerate as standard mass storage devices, allowing organizations to use existing SD inventory without controller restrictions.
- Supported media
- SD, SDHC, and SDXC cards
- Controller restrictions
- None for standard duplication workflows
- Media sourcing
- Customers may use their own SD cards from any manufacturer
- CID extraction
- Read Card Identification (CID) values from SD media
- Advanced media features
- Controller-level features such as hardware write protection and CID writing require certified Nexcopy media
Copy Methods & Data Workflows
- File copy
- Standard file-level duplication from host system to connected SD targets
- Full device copy
- Bit-for-bit device-level copy, including file system structures and boot sectors
- Short device copy
- Optimized device copy that writes only allocated sectors to improve performance on partially used media
- IMG file creation
- Generate device image files that capture boot code, partition structures, file systems, and data
- IMG file copy
- Write SD-specific image files (.IMG) to target devices for bootable or structured workflows
- File copy add
- Append new files to existing content on target devices without overwriting prior data
- Unique Data Streaming
- Supports individualized data per target device during a single production job (e.g., licenses, certificates, identifiers)
- Extract files from SD cards
- Read and copy files from connected SD devices to host system storage for review or recovery
Indicators & Controls
- System indicators
- LED indicators on the hardware sockets, with real-time status feedback provided through the Drive Manager GUI
- Physical controls
- System operation is managed through the Drive Manager software, with physical interaction limited to inserting and removing SD media
Power & Electrical
- UPS recommended
- Helps prevent job interruption during power loss (not required)
- Power quality
- Operate on stable AC power; avoid frequent brownouts or unstable generators
- Power input
- 120V / 240V auto-detecting power supply
Environment
- Indoor use only
- Avoid outdoor, vehicle, or uncontrolled warehouse environments
- Operating altitude
- Up to 6,500 ft (2,000 m)
- Operating temperature
- 41°F–122°F (5°C–50°C)
- Operating humidity
- 15% to 85% (non-condensing)
- Storage temperature
- 14°F to 140°F (-10°C to 60°C)
- Storage humidity
- 10% to 90% (non-condensing)
- Ventilation required
- Do not obstruct airflow around the unit during operation
Cleanliness & Maintenance
- Dust-free environment recommended
- Excessive dust may reduce socket reliability over time
- Socket maintenance
- SD target sockets should be inspected and cleaned periodically based on usage using electrical contact cleaner and compressed air
Packaging & Logistics
- Unit packaging dimensions
- 14 in × 11 in × 9 in (356 mm × 280 mm × 229 mm)
- Unit packaged weight
- 7.2 lb / 3.3 kg
- DIM weight
- 12 lb / 5.5 kg
- HS Code
- 8471.80 (Automatic data processing units and peripherals)
- Country of origin
- United States
- Incoterms
- Ex Works (Lake Forest, CA, USA)
- Package materials
- Corrugated cardboard carton with internal protective inserts
- Palletization
- Optional; available upon request. Not required for standard orders.
- Stacking limitations
- No special stacking limitations under normal handling conditions
Warranty & Support
- Warranty
- One-year warranty. Sockets are considered consumable after 30 days
- Software updates
- Lifetime updates included
- Technical support
- Lifetime technical support via email or phone. See the warranty page for equipment warranty details
Additional Information
This technical datasheet provides the standard technical specifications for the SD200PC platform. If your application requires additional detail, environment-specific clarification, or advanced configuration guidance, Nexcopy technical support can provide further documentation upon request.
If you need purchasing details, pricing, or an overview of use cases, return to the SD200PC product page.